DECO-BLOCKS offers a 10 years guarantee against ultra-violets rays and 10 years against deterioration caused by factory defects.
A Patented System
DECO-BLOCKS is an invention so unique; it has been patended for all North America, United States Patent, Industrial Design, CIPO (Canadian Intellectual Property Office).
GUIDE OF INSTALLATION
For any works, the preparation of the ground must be equivalent to the pose of concrete similar products. That is:
-
Dig a rather wide trench of a depth about 6 thumbs to receive blocks (it is necessary to plan also a space of 6 thumbs behind blocks to build a draining mass with the clear stone);
-
Recover then the back and the bottom of the trench of a geotextile to prevent the earth from blocking the system of drainage;
-
Prepare a foundation in this trench with the stone 0-3/4 then make the compaction by means of a vibrating plate;
-
Install then on this foundation a drain drilled by 4 thumbs of diameter and link him with the system of existing drainage;
-
Make the installation of the first one Row of
DECO-BLOCKS by taking good care to make fit every blocks:
-
Put in the level and fill with the necessary materials, that is the earth witch you removed to make your trench, come sand, the earth for garden, the gravel, etc.
-
Fill the space behind the DECO-BLOCKS with some clear stone
-
Place the following rows (ranks) with the same care until the wished height
-
End with the module of crowing.
PLANTATION
It is possible to make the plantation of flowers, shrubs, herbs or still ornamental plants straight from the DECO-BLOCKS. To this end you have to follow some rules that here is:
-
Make the preparation of the ground as for a conventional construction; make sure to drill the block wich will receive the plantation such as indicated (figure 2)
-
Complete half of the block withsome sand and end with the earth with plantation.
The same rules apply for the construction of walls or platforms in the water.
​
*N.B: please take note that it's better to fill the centrale partition in the first one.
​
INSTALLATION OF FENCE
The installations of fence on metamorphosis of support is now possible. What was a break-in-head now became a child's play. All that you had to do it is to follow the following stages:
-
Make the preparations of the ground as for a conventional constructions;
-
Install the post of fence in the block empty of the last row; for a little cement has the base of the post so that he stays in place
-
Complete the block with some sand; Persia
-
Modulates him of crowning closed view post
-
Place the module of crowning
-
End in sealing the outline of post with a product of waterproofness.
POLYETHLENE SPECIFICATIONS
GENERAL DESCRIPTION
Polyethylene ares semi-crystalline marterials with excellent chemical resistance, good fatigue and wear resistance, and a wide range of properties ( due to differences in length of the polymer chain.) polyethylene are easy to distinguish from other plastics because they float in water
GENNERAL PROPERTIES OF POLYETHYLENES
Polyethylene provide good resistence to organic solvents, degreasing agent and electrolyticattack. They have a higher impact strench, but lower working temperatures and tensile strengh than polypropylene. They are light in weigh, resistant to staining, and have low moisture absorption rates.
HIGHT DENSITY POLYETHYLENE
Representaing the largest portion of the polyethylene applications, HDPE offers excellent impact resistance, light weight, low moisture absorptions, and high tensile strength. HDPE is also non-toxic and non-staning meets FDA and USDA certification for food processing.
